How to Install Crown Moulding on Kitchen Cabinets

How to Install Crown Moulding on Kitchen Cabinets

Installing crown molding on kitchen cabinets can be a great way to add personality to your kitchen. The best time to install crown molding is while you’re building or remodeling your kitchen. This will ensure that the crown molding matches the rest of the room’s design and style, and it’ll be easier to install too! Installing crown molding is relatively easy with a few basic tools, and this article will walk you through how to do it. Here are some tips for installing crown molding on kitchen cabinets!

What to do Before you Start

It’s important to prepare the cabinets before installing crown molding. If the cabinets are already built, then you’ll have to sand them down and seal them with a primer. Next, paint the cabinets any color you want – just make sure it’s a semi-gloss finish so that the new crown molding will adhere properly.

Now that your cabinets are prepped, it’s time to install the crown molding! Here’s what you’ll need:

The first step is to screw in some metal studs at either end of your cabinet opening. These studs should be screwed into supporting walls or beams behind the wall where your hinges are for maximum stability. You’ll want one stud on either side of each hinge so that they’re evenly spaced; this will make it easier to attach the crown molding later.

Now, use an adjustable wrench to loosen any pipes or wires coming out of the wall so they don’t get hit by your crown molding at a later date. Once everything is clear, you can measure and cut your crown molding with a saw and drill holes for screws if necessary. Place your crown on top of the cabinet door and trace around its edges with a pencil or marker (or both). This will help guide you when attaching it later on!

Next, remove only one screw from each hinge at a time;

What is Crown Moulding?

Crown molding is often called the “crown jewel” of home design because it can really make a room stand out. It’s an attractive way to frame your kitchen cabinets and complement your kitchen design.

How to Install Crown Molding on Kitchen Cabinets

1. First, you’ll need to measure the wall or area where you want to install crown molding in order to buy the right amount of molding.

2. Then, use a miter saw to cut the crown molding at a 45-degree angle on one side.

3. Next, attach each piece of crown molding together with glue and putty nails. Make sure you’re using nails that are not too long, otherwise they’ll poke through your kitchen cabinet door!

4. After that, screw in one nail on either end of the crown molding and then place it against your kitchen cabinets with your desired length on top.

5. Finally, mark where the other pieces will go and pre-drill for your nails before attaching them to your cabinets!

Installing the Crown Molding on your Cabinets

Crown molding installation is very easy to do. However, you will need a few tools for this project:

  • A tape measure
  • A framing square
  • Scissors or a miter saw
  • A pencil
  • Wood glue
  • Wood screws and a drill
  • 1/2 inch crown molding (or other sizes)

The first step in installing the crown molding on your cabinets is to measure and mark the location of the crown molding on your cabinets. You will want the top of the molding to be about 2 inches from the top of your cabinet. The bottom of your molding should come down about 3/4 inches from the bottom of the cabinet. Once you’ve marked your measurements, use a framing square and pencil to draw lines along with these measurements. Then use scissors or a miter saw to cut along these lines.

Next, apply wood glue to one side of each piece that you cut out this is really important! Now screw one piece onto each side of the cabinet using two screws per piece. Then take a scrap piece of wood and place it on top of both pieces to keep them in place while they dry overnight. Repeat this process with all four pieces, then remove scrap board pieces when dry. Congratulations! Your crown molding is now installed!

Preparing to Install Crown Moulding

Before you begin, make sure the cabinets are clean and dry. You should also have a few tools handy: a sharp utility knife, a pencil, a spacer, a square level, and wood shims.

After you’ve made sure your cabinets are clean and dry, remove the old molding from your cabinets with a sharp utility knife. Make sure to cut any caulk that’s in the way of your new molding. Once you’ve removed all of the old material from the cabinet doors, use shims to fill any gaps between the cabinet doors and their frames.

Installing Straight or Flat-Top Crown Moulding

Before you start, make sure you have all the necessary tools. You will need a drill and either a miter saw or a circular saw to create the angled cuts of your molding. You’ll also need molding nails and a few clamps to hold the molding together while you’re installing it.

Installing Angled Crown Moulding

When installing angled crown molding, you need to make sure that you have enough space between the top of the cabinet and the ceiling. If there isn’t enough space, then you’ll need to install crown molding on either side of the cabinet or cut it down so that it is the same height as the cabinets.

If you’re installing angled crown molding, you’ll also want to make sure that none of the moldings are touching. You should be able to see a gap in-between each piece.

You can use a combination of different angles for crown molding on kitchen cabinets in order to add more detail and more angles to your room’s design.

Once you’ve installed your crown molding, don’t forget to seal any cracks with paint or caulk! This will help prevent drafts and cover up any unwanted seams or gaps in your new kitchen design.

Making Cuts for Crown Moulding on Kitchen Cabinets

First, you’ll need to decide how much crown molding you want on your cabinets. If you are installing the molding yourself, it’s best to leave a few inches of space above the upper cabinets for you to install crown molding. Measure the space and cut accordingly.

You can use a miter saw to make cuts for crown molding on kitchen cabinets. This is the type of saw that has a clamp on one side and an adjustable blade on the other side. You’ll need to set up a piece of 2×4 lumber as a backstop when making these adjustments because they will be very close to your wall or floor.

Tools you’ll need

You’ll need a few basic tools to complete this project:

  • A circular saw or table saw with a miter gauge
  • Miter box and hand saw
  • Cordless drill with a screwdriver bit
  • Paintable caulk
  • Tape measure
  • Protective gear (eye protection, dust mask, etc.)


Crown molding is a great way to add a beautiful finishing touch to your kitchen cabinets. Installing it requires some work but it is worth the effort. Follow these instructions to install molding on your cabinets.